Ürün ayrıntıları:
Ödeme & teslimat koşulları:
|
| Product Name: | High Mast Pole | Application: | Plaza Lighting |
|---|---|---|---|
| Wind Speed: | 160km/h | Galvanization Thickness: | Average 86μm |
| Lamp Luminous Flux(lm): | 100 | Flood light: | 1000W |
| Vurgulamak: | high mast lighting pole,Sports Light Poles |
||
Q235 6 Lamps 30M High Mast Pole with Lifting System Powder Coating
Descripition of material:
The material is in accordance with NF EN 10025
Standard and NF EN 10149 Standard,it has the following property.
-Yield Strength=355N/mm2
-Toughness remains the same under 20 degrees below zero.
-Galvanization is in accordance with NFA35503 Standard Class 1.
Specifications:
|
Height |
From 3 m to 50 m |
|
Suit for |
Airport ,seaport , plaza, stadium , square ,highway, street way etc |
|
Shape |
Conoid ,Multi-pyramidal , Columniform,polygonal or conical |
|
Material |
Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 , SS400, SS490, to ST52- |
|
Tolerance of dimension |
+- 2% |
|
Power |
400 W- 5000 W |
|
Lamp &Luminaries |
Projector generally to be applied with safety grade IP65 Luminaries with high pressure sodium lamp of long lift and high lighting efficiency ,or metal halide lamp with high CRI |
|
Lifting system |
Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute Equipped electromagnetism brake and break –proof device, manual operation applied under power cut |
|
Electric appliance control device |
Electric appliance box to be the holder of the pole , lifting operation could be 5 meter away from the pole through wire Time control and light control could be equipped to realize full-load lighting mode and part lighting mode |
|
Surface treatment |
Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. |
|
Joint of Poles |
Insert mode,innerflange mode,face to face joint mode . |
|
Design of pole |
Against earthquake of 8 grade |
|
Wind Speed |
160 Km/Hour |
|
Minimum yield strength |
355 mpa |
|
Minimum ultimate tensile strength |
490 mpa |
|
Max ultimate tensile strength |
620 mpa |
|
Length of per section |
Within 15m once forming without slip joint |
|
Welding |
We have past flaw testing. Internal and external double welding makes the welding beautiful in shape Welding Standard :AWS ( American Welding Society ) D 1.1 |
|
Thickness |
4 mm to 40 mm/customized |
Standard:
Electric box protection level: IP23
Lamp protection level: IP54
Installation:
1. high-pressure sodium lamp with external ballast and Triggers installed in light tray.
2. when replacing or repairing light and other electrical appliances, you should use special wrench to open it.
3. control box installed at the poles or the lower part of the poles
Lamp Panel:
Professional Direct Buried Q345 15m Metal Utility Poles Octagonal Cross Section Shape
Baş üstü proje için sıcak daldırma galvanizleme elektrikli direk
Conical 3.5mm thickness electric power pole 22m height with three sections for transmission
3mm Thickness NGCP Electrical Power Pole For Electricity Distribution
Transmission Line Project Electrical Power Pole 18m 10KN For Electricity Distribution
Power Line 11m 8KN Electrical Power Pole With Galvanizing Surface Treatment
Anticorrosive 14m 500Dan Steel Power Pole For Power Transmission Electric Line
Electricity Distribution 12m Tubular Steel Power Pole For Transmission Line Project
11.8m Height Spray Paint Galvanised Steel Poles For Transmission Equipment
12m Gr 65 Material Galvanized Steel Pole Round Electric Transmission Line Poles
12m S355 S500 Steel Power Pole ASTM A123 Galvanized For Street Lighting
Multi Sided Single Circuit Galvanized Steel Pole For Electrical Line 132kv
